28
NED
RCDL2K20CL
UME-0115-02
equipment and the camera, and not next to each other.
5) If the camera does not light up even when the power is supplied, turn off the
power immediately and check that there is no problem with the wiring or the
voltage or capacity of the power supply.
6) It is recommended that the shielding of the power cable be connected to the
GND of the power supply side.
Acceptable Cable (Acceptable plug): DGPSH-10 (HIROSE: HR10A-7P
–6S)
Power supply voltage: DC+12
–15V (+/-5%)
Consumption Current (rated): DC+12V: 300mA
◆
If the lamp fails to illuminate even after power is supplied, turn off power immediately.
Inspect wiring. Check the voltage and capacity of the supplied power source.
