27
NED
RCDL2K20CL
UME-0115-02
This camera uses 6-pin round shape push-pull lock type connector for the Power Supply.
The compatible cable (compatible plug) is DGPSH-10 (Hirose: with HR10A-7P-6S).
1
2
3
5
6
4
Figure 3-3-4 Power Supply Connector (HIROSE: HR10G-7R-6PB)
Table 3-3-2 Pin Assignment of Power Supply Connector
No
Name
cable color
1
12
–15V
white
2
12
–15V
red
3
12
–15V
－
4
GND
green
5
GND
black
6
GND
－
Notes:
1) The cable color in the table indicates the compatible cable DGPSH-10.
3.4 Power supply
3.4 Power Supply
The camera requires a single power supply (DC+12 to +15V).
When DC +12 to +15V power is supplied, the indicator (LED) lights up red, and after
about 10 seconds, it changes to light up green and enters the operating state.
Notes:
1) It is recommended to select a power supply with enough capacity to handle the
inrush current. (5 W or more is recommended)
2) Make sure that the cable plug is firmly inserted until it locks to prevent the
connector from being disconnected during power-on.
3) If this product is to be used in an area where lightning occurs frequently, take
measures against lightning surges on the power supply line to the camera.
4) The power supply and grounding of the camera should not be connected to
equipment that generates large electromagnetic waves (e.g. inverter-controlled
motors), as this may cause malfunction or failure.
Also, make sure that the signal cable and power cable are separated from the
