Necta Necta Colibri Espresso, Installation, Use And Maintenance Manual

Page: 17 / 47

14
© by NECTA VENDING SOLUTIONS SpA 09-2003 228 00
OPERATING MODES
Three different operating modes are provided for the
machine; the buttons will have different functions accord-
ing to the machine operating mode.
The available operating modes are indicated in the follow-
ing table:
DISPLAY FUNCTIONS
Normal operating mode
“Ready for use” coins accepted
products dispensed
Maintenance
“Maintenance” test dispensing
machine maintenance
Programming mode
“Programming” programming
NORMAL VENDING MODE
When switching the machine on, the display will show the
message “Rev. X.X” (X.X indicates the software release
number) for a few seconds, after which the machine will
be set to normal vending mode.
The massages displayed according to the operation being
carried out can be the following:
DISPLAY FUNCTION
“Ready for use” Machine ready
“Price:....” Price display of selected
product
“Credit:.....” Displaying credit inserted
“Out of order” Machine switched off
“Drink in process” Drink preparation
“Heating” Wait time before reaching
operating temperature
“Installation” Installation under way
“Sel. Disabled” Selection disabled
“Coffee sel. out” For espresso models only
Coffee unit out of order
“Take the drink” Drink ready
MAINTENANCE MODE
When the programming button located on the internal side
of the push-button board (see Fig. 18) is pressed once the
machine will go to “Maintenance” mode.
The message “Maintenance” is displayed for approx. two
seconds and then the first option of the “Statistics” menu
is presented, permitting data management.
When in maintenance mode the buttons have the following
functions:
1 - Previous function / Increase data item (+1)
2 - Exit function / Cancel change
3 -
4 -
5 -
Next function / Decrease data item (- 1)
6 - Confirm function / confirm data
7 - Change data item
8 -
Press button " " to access the following functions:
- Display statistics
- Print statistics
- Delete statistics
- Display selection counter
Scroll through the menu with the " " and " " buttons to
highlight the following functions:
"Complete Sel.” Test dispensing
“Powd. only” Dispensing powder only
“Water only” Dispensing water only
When pressing button " " the selection buttons will take
on the original function for 7 seconds, permitting the test
dispensing provided for each function.
N.B. For espresso coffee based selections, only the
additions are dispensed with the partial dispensing of
powder and water; if a selection requires no addition
the message “Sel. disabled”, indicating a disabled
selection, will be displayed.