16
© by NECTA VENDING SOLUTIONS SpA
09-2003 228 00
MDB statistics
Total cash
Inserted coins
Returned coins
Inserted bills
Amount of total sales
Amount of total cash
Amount of cashless sales
Money charge
Amount of discounts
PRINTING THE STATISTICS
Connect an RS-232 serial printer with a Baud rate of 9600,
8 data bit, no parity, 1 stop bit to the serial port located on
the push button board, to print all the statistics described
in section “Displaying the statistics”. The hardcopy print-
out will also contain the machine code number and the
printout progressive number.
The progressive hardcopy printout number can only be
reset by initialising the machine.
To connect the printer, do as follows:
- Press button " " when the display indicates the “Print
statistics” function and the message “Confirm?” will
be displayed;
- before confirming connect and switch on the printer;
- press the confirm button “ ” to start printing.
RESETTING THE STATISTICS
Press button " " with the display indicating the “Delete
statistics“ function, then the message “Confirm?” will be
start blinking.
Press the confirm button “ ”, the message “Working” is
displayed for a few seconds and all statistics are reset.
GENERAL COUNTER
The machine stores all selections in this counter, which
cannot be reset.
This function allows reading or displaying of the counter
when the machine is switched started.
Press button " " with the display indicating the “Display
counters” function, the function status (ON/OFF) will be
displayed; press button " ", the status will start blinking
and then can be changed with the " " and " " buttons.
Press button " " again and the stored value will be
displayed for 3 seconds.
PROGRAMMING
When the programming button located on the internal side
of the push-button board (see Fig. 18) is pressed twice the
machine will be set to “Programming” mode.
The message “Programming” is displayed for approx. 2
seconds, and then the first option of the programming
menu is displayed to activate the following functions:
“Present failures”
current failure reading
“Water doses”
water dose setting
“Powder doses”
powder dose setting
“Set Prices”
price setting
“Set Prices/button”
prices/button combination
enables/disables button
“Basic coin / DP”
setting the basic coin value
and position of the decimal point
“Payment systems”
setting the validator and MDB
MDB protocol control
“Initialise”
RAM initialising
“Machine code”
setting the machine
identification code
“Machine Config.”
setting the machine
configuration
“Selec. counter”
setting the number of selections
after which the machine will lock
“Prom. message”
enabling and setting the
promotional message
“Language”
setting the language used to
indicate messages on the
display
“Whipping time”
whipping time for instant coffee
“Prog. password”
enabling the password to
access programming
“Special sales”
Free Vend and Jug Facilities
“Set date/time”
setting date and time
“Set wash”
setting the wash time
“Discount time band” setting the time band for
discounts
“Set band prices”
setting discounted prices
Summary of Contents for Necta Colibri Espresso
