background image

21

© by NECTA VENDING SOLUTIONS SpA

09-2003 228 00

FAST CYCLES

When this function is enabled, some of the time that
is useful for improving the drink quality is eliminated.

instant selections

- all of the products that compose the drink are dispensed

at the same time;

- the “post-whipping” time is eliminated.

espresso selections

- brewing of ground coffee is not performed.

- the pump, used to increase the boiler pressure after an

instant drink selection, is not started;

- the “post-whipping” time is eliminated.

SELECTION COUNTER

This function is used to lock the machine after a preset
number of coffee selections, and a preset number of
instant selections.
Since this is a control tool used only by the vending
operator, a 4-digit password must be entered.
After entering the password, it is possible to set the
number of selections after which the machine locks, read
the number of selections already made and reset the lock
counter.

N.B.: The counters are set to zero by default;

With the counters set to zero, this function is disabled.

SETTING THE PROMOTIONAL MESSAGE

When this menu is displayed, press the confirm button “ ”
to display whether or not the message is enabled (ON/
OFF).
If the message is enabled, when pressing the confirm
button “ ” the first character will start blinking and can be
changed.
The buttons will take on the following functions:

LANGUAGE SELECTION

This function is used to select the language to be used for
displaying the messages.
The available languages are:

- English;

- Italiano;

- Français;

- Español;

- Português;

- Deutsch.

WHIPPING TIME

This function is used to define how long (in tenths of a
second) instant coffee is to be whipped according to the
amount of drink to be obtained.

PROGRAMMING ACCESS PASSWORD

This function is used to enable the request for a password
to access the programming procedures.
The password is the button sequence 1 1 2 2 and cannot
be changed.

SPECIAL SALES

This function is used to enable or disable Free Vend and
to set the number of consecutive instant drinks (1 to 9; 5
by default) that are dispensed when the “Jug facilities”
function is enabled.
After these functions are enabled, do as follows:

- while in normal operating mode, press button “8” for a few

seconds;

- enter the password that was just set;

- make a selection within 10 seconds.

SETTING THE CLOCK

This function is used to set date and time of the internal
clock.

AUTOMATIC WASH

Option of setting the time when automatically washing the
mixers. When setting the time to 24.00 the function is
disabled (default).

SETTING THE TIME BAND

This function is used to define the time band for sales at
differentiated prices.

SETTING THE TIME BAND PRICES

This function is used to define the prices to be applied
during the time band for sales at differentiated prices.

1 - Previous character
2 - Next character
3 - Upper/lower case
The values are displayed alternately by pressing the
button sequentially.
The message is stored by pressing button “2” when on the
last position.

Summary of Contents for Necta Colibri Espresso
















































Reviews: