Necta Necta Colibri Espresso, Installation, Use And Maintenance Manual

Page: 5 / 47

2
© by NECTA VENDING SOLUTIONS SpA 09-2003 228 00
IN THE EVENT OF FAILURES
In most cases, any technical problems are corrected by
small repair operations; however, before contacting the
manufacturer we recommend that this manual be read
carefully.
Should there be serious failures or malfunctions, contact
the following:
NECTA VENDING SOLUTIONS SpA
Via Roma 24
24030 Valbrembo
Italy - Tel. +39 - 035606111
TRANSPORT AND STORAGE
To prevent any damage, special care should be taken
when loading or unloading the vending machine.
The machine can be lifted by a motor-driven or manual fork
lift truck, and the blades are to be placed underneath the
machine.
Do not:
- overturn the vending machine;
- drag the vending machine with ropes or similar;
- lift the vending machine by its sides;
- lift the vending machine with slings or ropes;
- shake or jolt the vending machine and its packing.
The machine should be stored in a dry room where the
temperature remains between 0°C and 40°C.
Using the original packing, no more than 2 machines can
be stacked one on top of the other and must always kept
upright as indicated by the arrows on the packing.
INTRODUCTION
This technical documentation is part and parcel of the
vending machine and must always follow the machine
in case it is moved or transfer of ownership, so as to
allow consultation by different operators.
Before starting installation and using the machine, it is first
necessary to carefully read and understand the instruc-
tions contained in this manual, as they offer important
information on installation safety, operating instructions
and maintenance.
The vending machines in the Colibrì range are designed
to meet a wide spectrum of user needs.
This manual describes all possible machine configu-
rations and the related safety and maintenance in-
structions.
Non-standard devices will be indicated as “optional”.
IDENTIFICATION OF THE VENDING
MACHINE AND ITS CHARACTERISTICS
Each machine is identified by its own serial number,
indicated on the rating plate attached inside the cabinet on
the right side.
This plate (see Figure below) is the only one acknowl-
edged by the manufacturer and indicates all of the data
which readily and safely gives technical information
supplied by the manufacturer. It also assists in spare parts
management.
Water mains characteristics
Absorbed power
Operating voltage
Model
Product code
Boiler data
Current
Frequency
Serial
number
Type