Necta Korinto UL, Installation, Use And Maintenance Manual

Page: 7 / 56

3
© by N&W GLOBAL VENDING SpA 07 06 274 - 00
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installation.
It must be positioned in a dry room where the temperature
remains between 2° C and 32° C, and not where water jets
are used for cleaning (e.g. in large kitchens, etc.).
The machine can be placed close to a wall, but with the
back panel at a distance of at least 4 cm from it to ensure
correct ventilation. The machine must never be covered
with cloth or the like.
The machine should be positioned on a level surface.
Important notice!!
Access to the machine interior for maintenance and/or
repairs is via the back panel and from the side panels.
Therefore the machine is designed to be rotated, thus
allowing removal of the back panel and of the side panels.
Installation on a cabinet
The machine can be installed on a table or on any other
suitable stand (recommended height is 830).
If possible, it is advisable to use the special cabinet, which
can house the liquid waste tray, the water supply kit, the
payment system and, in the case of very hard water, the
softener unit.
WARNING FOR INSTALLATION
The machine installation and the following
maintenance operations should be carried out by
qualified personnel only, who are trained in the correct
use of the machine according to the standards in
force.
The machine is sold without payment system, therefore
the installer of such system has sole responsibility for any
damage to the machine or to things and persons caused by
faulty installation.
The integrity of the machine and compliance with the
standards of the relevant systems must be checked at
least once a year by qualified personnel.
All packing materials shall be disposed of in a manner
which is safe for the environment.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch the machine off during periods of inactivity, thus
achieving considerable energy savings.
WARNING FOR SCRAPPING
The symbol indicates that the machine may not be
disposed of as ordinary waste; it must be disposed of in
accordance with the provisions of the European directive
2002/96/CE (Waste Electrical and Electronics Equipments
- WEEE) and of any resulting national laws, for preventing
any possible negative consequences to the environment
and to health.
For correct disposal of the machine, contact the dealer
from whom you have purchased the machine or our after-
sales service.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Height 715 mm
Width 331 mm
Depth 528 mm
Overall depth with door open 734 mm
Height of cabinet 830 mm
Weight 32 Kg
Power supply voltage 120 V~
Power supply frequency Hz 60
Installed power W 1400
Absorbed current A 11,8
Fig. 2