Necta Korinto UL, Installation, Use And Maintenance Manual

Page: 27 / 56

23
© by N&W GLOBAL VENDING SpA 07 06 274 -00
Setting the regeneration counter
It is possible to display the message
“Replace water filter” after a programmable number of
selections. If set in the programming menu, it is possible to
reset the message with the door closed through a pass-
word, after replacing the filter.
Automatic wash
Option of setting the time when automatically cleaning the
mixers and rotating the brewing units installed. When
setting the time to 24.00 the function is disabled (default).
Energy saving
In order to save electric power when the machine is not in
use, this function is used to switch off boiler heating and/
or external lighting.
2 switch-off time bands can be programmed on a weekly
basis; the week days are identified by a progressive number
(1=Monday, 2=Tuesday etc.).
The same time band cannot include days from different
weeks.
If time bands are set overlapping, the machine will remain
switched on for the shorter period.
For example, in order to set energy saving time bands to run
the vending machine from 07.00 to 22.00 during the week
and leave it switched off on the weekend, the time bands
should be set, using the special menu, as indicated in the
table below.
No coffee
If the function it is possible to enable/disable the indication
on the display “Insert coffee” if the grinder detects the
absence of coffee.
DISPLAY
This group of functions controls all parameters concerning
the display indications.
Decaf cycle
When enabling this function, instant coffee powder (if
present) is dispensed in two steps to improve the appear-
ance of the drink.
Equipped base cabinet
With this function enabled, the machine controls the water
level sensor as not present and disables the coffee grounds
counter.
The float and coffee grounds collection functions are
performed by the devices inside the base cabinet.
Selection counter
This function is used to lock the machine after a program-
mable number of coffee selections, and a programmable
number of instant selections; alternatively, the machine
can be locked after a programmable number of selections.
Since this is a control tool used only by the vending
operator, a 5-digit password must be entered.
After entering the password, it is possible to set the number
of selections after which the machine locks, read the
number of selections already made and reset the lock
counter.
N.B.:
The counters are set to zero by default;
With the counters set to zero, this function is disabled.
TECH>
SET PARAMETERS
TECH>
DISPLAY
TECH>
SET PARAMETERS
TECH>
PRE-SELECTIONS
Language
There is an option of language, selected among the ones
available in the software, to be used for the messages on
the display.
Promotional message
It is possible to define whether or not the message is to be
displayed.
The 2-line message can be written using the “ ” and “ ”
buttons to scroll through the available characters.
Press the confirm button “ ”, the first character will start
blinking and can then be modified.
The message is stored by pressing button “ ”.
PRE-SELECTIONS
This function is used for setting the pre-selections, associ-
ated to each single selection, present in the specific model
and layout.
For each pre-selection it is possible to decide whether or not
it is to be enabled, which button will be assigned to, the
selection price change and the percentage change in
product dose.
Day 1 2 3 4 5 6 7
band 1
start 00.00 00.00 00.00 00.00 00.00 00.00 00.00
end 07.00 07.00 07.00 07.00 07.00 23.59 23.59
band 2
start 22.00 22.00 22.00 22.00 22.00 00.00 00.00
end 23.59 23.59 23.59 23.59 23.59 00.00 00.00