Necta Vending Solutions SpA StarFood, Installation, Use And Maintenance Manual

Page: 17 / 68

13
© by NECTA VENDING SOLUTIONS SpA 0401 171 - 02
ANTI-TAMPERING CHECK
This function is used to align to vending position the
compartments recognised as empty by the machine con-
trol software to visually check that no products were
accidentally left.
TEST
DRUM TEST
With this function the correct functioning of the drum
rotation can be tested by pressing the selection buttons.
With these function, pressing the loading buttons does not
change the status of a drum and/or of a sector (full/empty/
expired).
SLIDER TEST
With this function the correct functioning of the sliders can
be tested by pressing the selection buttons without rotating
the drums.
With these function, pressing the loading buttons does not
change the status of a drum and/or of a sector (full/empty/
expired).
COMPLETE SELECTIONS
Normal product dispensing can be simulated
without inserting any money.
With this function, pressing the selection button changes
the status of a drum and/or of a sector (full/empty/
expired).
GSM PRE-ALARMS
The control software can send, via GSM modem, a signal
indicating an “ending product” signal, when there is only a
certain (programmable) number of pieces or grams of
powder of a given product left. With this function the
counters that control the pre-alarms are reset.
EVADTS TRANSFER
When activating this function, the machine awaits the
connection with a device to acquire the EVADTS statistics.