10
© by NECTA VENDING SOLUTIONS SpA
0401 171 - 02
OPERATING MODES
The vending machines in this range have four different
function levels, and namely:
- normal operation;
- loading;
- filler menu;
- technician menu.
According to the operating mode, the display and keypad
functions change as described in the following paragraphs.
USER INTERFACE
The interaction between system and user occurs through
the following components:
- Button
, used to rotate those drums that are pro-
grammed for “Shopper” mode or, with the door open,
all drums.
- Liquid crystal display (LCD) 4 lines of 20 characters.
- The first four selection buttons, which in maintenance
and programming mode have the following functions
(see Fig. 8):
Scrolling buttons “ ” and “ ”:
To move to the next or previous menu option.
Confirm button “ ”:
To move from a menu to a sub-menu or it is used to confirm
the current information on the display.
Exit button “ ”:
To move back from a sub-menu to the higher level menu,
or used to cancel the current information on the display.
Programming button “ ”:
(See Fig. 5) To move back from a sub-menu requiring the
use of selection buttons to the higher level menu.
NORMAL OPERATING MODE
The machine is preset to “Normal operation” mode when
connected to the power supply with the door closed (see
programming switch).
The lighting lamps are switched on and the product dis-
pensing messages are indicated on the display, as well as
other information like temperature and time or details of
any current failures.
When pressing button
the drums programmed for
“shopper” mode will rotate until the button is released.
If there is sufficient credit, when pressing a selection button
the corresponding slider, driven by the motor, opens auto-
matically to the slider stop.
Fig. 8
Fig. 9
1 - Product slider
2 - Rack
3 - Slider stop
4 - Cog wheel
5 - Slider microswitch
6 - Motor snap tangs
7 - Slider motor
The control system detects the increase in electrical ab-
sorption of the motor and stops it for a programmable time
(10 seconds by default).
After this time lapses, the motor starts closing the slider.
During the closing phase the slider can be opened again by
pressing a selection button:
Should the slider be obstructed in some way, four consecu-
tive closing attempts will be made before disabling the
machine.
For the following 10 minutes the closing attempts will be
repeated every 60 seconds.
The closing attempts are indicated by a sound and on the
display.
Summary of Contents for StarFood
