|
Setting/Setting Confirmation
217
are as follows.
1-64 characters (ASCII 0x21-0x7e)
(except ", ', `, #, \, $, space, ?)
Authentication Type:
Opposite Device
Set the authentication scheme of
the opposite device. Select pre-
shared key, EAP-MD5 or digital
signature. Allowed characters for
the pre-shared key and EAP-MD5
are as follows.
1-64 characters (ASCII 0x21-0x7e)
(except ", ', `, #, \, $, space, ?)
Not set
Local ID Setting
Set the input format of ID payload
of the device sent at IKE phase 1.
•
Default (Source IP address): if the
IP address of the WAN interface
of this product is used.
•
IP address: IP address format
•
FQDN: Domain name
•
Key-ID: Random character string
•
User-FQDN: Domain name with a
user name
Default
(Source IP
address)
Local ID
Set ID according to the format of
the selected "Local ID Setting".
•
IP address: IP address format
•
FQDN: Set in domain name
format. Character string can be
1~64 alphanumeric characters.
•
Key-ID: Character string can be
1~47 alphanumeric characters.
•
User-FQDN: Set in the form
"username@domainname".
Character string can be 3~160
alphanumeric characters.
*ASCII (0x21~0x7e) characters can
be used for "FQDN", "Key-ID",
"User-FQDN" except the following:
" ' ` # \ $ = ?<space>
Sample input
IP address
: 192.0.2.3
FQDN
:
local.example.com
Key-ID
: LocalID-1
User-FQDN
:
Not set
Remote ID Setting
Set the input format of ID payload
of this product's IPsec peer device
to send at IKE phase 1.
•
Default (Destination IP address):
if the IP address of the IPsec peer
device is used. This will not be
Default
(Destination IP
address)
