Page 5-6
NDA-24232 Issue 2.0
Chapter 5
VisuaLink 128/384 Quick Installation Guide
17.Using a Phillips screwdriver fasten the 384 rear panel to the housing of the VL.
18.Locate the VL cover panel and fasten back onto the VL.
19.Connect all cables which where previously connected to the VL.
20.The Hardware Installation is complete, continue on to the last step
Environmental Initialize.
5.4 Environmental
Initialize
1. Press the MENU button on the wireless remote controller (See diagram below).
2. Using the wireless remote controller select the On-Screen icon labeled
SETTING ENVIRONMENTS.
3. Press the ENTER button.
4. Enter the PASSWORD and press the ENTER button on the wireless controller.
5. Using the wireless remote controller MOVE button select the ON-Screen icon
labeled MAINTENANCE.
6. Press the ENTER button
7. Locate the PAGE UP button on the wireless remote controller. Press the ONE
button.
8. Using the wireless remote controller CAMERA CONTROL button select the
environmental initialize.
9. When the environmental initialize is complete, the system asks you to restart the
system.
10.Restart the system.
PAGE UP
ENTER
ONE
MENU
CAMERA
CONTROL
Summary of Contents for VisuaLink 128
Page 6: ......
