Page 4-10
NDA-24232 Revision 1.0
Chapter 4
VisuaLink 128/384 Quick Installation Guide
23.
Locate the network cable (RJ45-RJ45) and
connect one end to the S/T line port of the
VisuaLink 128/384. Connect the other end of the
network cable into the network interface provided
in the room wall.
Note 1: If the NT1 or network switch resides 300
ft. (91 m.) or more away from the
VisuaLink 128/384, it is recommended
that the TERM switch is set to ON on the
VL128.
Note 2: In the case a VL384 is being installed,
remove the network interface card from
the system and set the required straps.
Note 3: f the VL 384 is being installed, Step 23
must be repeated three (3) times.
24.
Locate the ON/OFF switch at the upper right
outside of the cabinet. Press the switch to the ON
position.
STEP
ACTION
DRAWING
+
+
+
+
+
DC IN 5V
+
-
Serial1 Serial2/RMT
O
U
T
I
N
VIDEO2 VIDEO1 AUDIO
+
+
TEL
S/T LINE
MIC1
MIC2
MIC3
RJ45 NT1 Cable
+
+
+
+
+
DC IN 5V
+
-
Serial1 Serial2/RMT
O
U
T
I
N
VIDEO2 VIDEO1 AUDIO
+
+
TEL S/T LINE 1 S/T LINE 2 S/T LINE 3
MIC1 MIC2 MIC3
VisuaLink 384 Rear
RJ45 NT1 Cable
VisuaLink 128 Rear
ON/OFF Switch
Summary of Contents for VisuaLink 128
Page 6: ......
