NEC VERSA S1300 Series, Quick Reference Manual

Page: 16 / 48

2-4 Manual List
ð
Maintain and manage logical disks ( e.g. , assign/release
pooled spare disks to/from a business server).
•
Section C, “NEC Storage Manager: Command Line Interface”,
explains how to configure the disk array through the CLI
(Command Line Interface). Refer to Section C to:
ð
Understand the storage configuration of the NEC Storage
series.
ð
Bind/unbind logical disks. (Batch changing is also
permitted.)
ð
Make the following settings for disk arrays: cross call
mode, auto assignment mode, auto repair mode, time
format, LUN expansion, disk array time, error log dump.
ð
Display information about disk configurations and the
disk arrays.
ð
Specify the start of disk repair operations.
Note:
If “NEC Storage AccessControl” is
installed, settings cannot be made through the
CLI. You must use the GUI.
n
“NEC Storage Optional Software Manual” (ISM_Optional.pdf)
This manual contains instructions for using optional software
programs. It is composed of five sections.
•
Section A, “NEC Storage PathManager User’s Manual”
explains how to use the path management function “NEC
Storage PathManager”. Refer to this section to:
ð
Monitor path state.
ð
Setup load balancing and clustering features.
ð
Detect and troubleshoot path failures using Path Patrol.
ð
Log errors under NEC ESMPRO.