NEC VERSA S1300 Series, Quick Reference Manual

Page: 15 / 48

Manual List 2-3
n
“NEC Storage Manager User’s Manual” (ISM_UG.pdf)
This manual provides you with essential guidelines for using your
management software NEC Storage Manager (also called iSM). It
consists of three sections.
•
Section A, “Installing and Setting NEC Storage Manager”,
explains how to install NEC Storage Manager and make basic
settings. Refer to Section A to:
ð
Install NEC Storage Manager on a server and on a client.
ð
Use the following basic features of NEC Storage
Manager: configuration display, state monitoring,
nickname setting (disk array name, LD name, and port
name), error monitoring, log output, and event link.
ð
Start/stop the server and client.
ð
Use the volume list command.
ð
Detect and diagnose software errors that may occur in the
server or client while NEC Storage Manager is running.
•
Section B, “NEC Storage Manager: Graphical User Interface”,
explains how to configure the disk array through the GUI
(Graphical User Interface). Refer to Section B to:
ð
Understand the storage configuration of the NEC Storage
series.
ð
Bind/unbind logical disks. (Batch changing is also
permitted.)
ð
Set nicknames (disk array name, LD name, and port
name). (Batch changing is also permitted.)
ð
Batch change replication settings.
ð
Set the platforms of ports.
ð
Make the following settings for disk arrays: cross call
mode, auto assignment mode, auto repair mode, time
format, LUN expansion, disk array time, error log dump.
ð
Specify the start of disk repair operations.
ð
Set AccessControl.