NEC VERSA S1300 Series, Quick Reference Manual

Page: 38 / 48

5-4 Functions of NEC Storage Manager
Information List Display Area
Displays a list of information about components in the layer immediately
following the layer you selected (left-clicked) in the configuration display area.
If you select a disk array in the configuration display area, the area displays a
list of information about resources (“logical disk”, “physical disk”, “controller”,
and “enclosure”) that configure the disk array.
Message Display Area
Displays messages that indicate disk array errors, NEC Storage Manager errors,
and operating states. Double-clicking on a message displays the help
information for the message. For the display contents, refer to the “NEC
Storage Manager Messages Handbook”.
Status Bar
Displays the current state of the iSM client.
While a session is established, “Con.”, the address of a server on which the iSM
server is active, the server’s port number, the client name, the user level, and the
type and the number of listed components are displayed.
User Levels of NEC Storage Manager
NEC Storage Manager defines user levels and specifies operable ranges.
Therefore, users of iSM clients need to preset a user level.
Define the user level setting in the iSM server. For the definition, refer to
“Setting User Information” in Chapter 1 of Section A in the “NEC Storage
Manager User’s Manual”.
Table 5-2 User Levels and Operable Ranges
User Level Operable Function
Level 1 Use of only the reference functions mainly performed to
display/monitor state information is permitted. (For general users)
Level 2 Use of the level-1 functions and the functions necessary for daily
operation is permitted. (For operators)
Level 3 Use of all the functions including the settings of disk arrays is
permitted. (For system administrators)