4-20 Using Your NEC Versa Note
The following module capacities are available:
32-MB memory module.
64-MB memory module
128-MB memory module (depending on availability).
Install SO-DIMMs as follows.
1.
Make sure the system is powered off and that no peripheral devices
are attached.
2.
Turn the system over and locate the screw on the Memory Module
Bay cover as indicated in the figure shown next.
Memory Module Bay Cover on the bottom of the system
1. Memory Module Bay Cover
2. Screw
3. Upper side of Memory Module Bay Cover
3.
Remove the screw.
4.
Gently lift the Memory Module Bay cover.
5.
Locate the alignment notch on the module.
❷
❸
❶
Summary of Contents for VERSA NOTE
Page 55: ...3 Using Setup and Power Management Setup Utility ...
Page 95: ...5 Using Multimedia Audio Video Multimedia Applications ...
Page 102: ...6 Traveling with Your NEC Versa Note Power Connections Checklist Information ...
Page 125: ...B Specifications System Components Interrupt Controllers DMA Settings ...