NEC VERSA NOTE, Manual, Page: 110 / 159

7-6 Solving Problems
Post Error Messages
Error Message Explanation
System CMOS
checksum bad - run
SETUP System CMOS has been corrupted or modified
incorrectly, perhaps by an application
program that changes data stored in CMOS.
Run Setup and reconfigure the system either
using the Default Values and/or making your
own selections.
System RAM Failed
at offset: nnnn System RAM failed at offset nnnn of the 64k
block at which the error was detected.
System timer error The timer test failed. Requires repair of
system board.
If You Need Assistance
If you have a problem with your computer, first review the checklist and
troubleshooting table in the previous section.
If you still have a problem, see Appendix C, “Getting Services and
Support,” for details about contacting NEC CSD.
Note:
If you purchased your computer outside
of the U.S. or Canada, please contact the local NEC
CSD office or their dealers for the support and
service available in your country.