![background image](http://html.mh-extra.com/html/nec/versa-2500-series/versa-2500-series_manual_249086071.webp)
3-12 Using Setup and Power Management
You can set your system to enter Suspend mode auto-
matically after a specified number of minutes of system
inactivity. You specify how long system inactivity
elapses before the system enters Suspend mode. System
activity includes keyboard, VersaGlide, diskette or hard
disk drive access, PCMCIA modem, network, or LAN
card, serial, or printer port communications.
Power Management Settings
The system arrives set up with many power-saving features
already enabled. You can change the timeout period for
these devices using Setup. See the following table.
Automatic Power-Saving Features
Device
Default
Timeout
Comment
Standby Timeout
2 minutes
System enters Standby mode after total
system inactivity.
Auto Suspend Timeout
2 minutes
This settings specifies how long the
system remains in Standby mode before
entering Suspend mode.
Hard Disk Timeout
2 minutes
Hard disk motor stops when hard disk is
not accessed for specified timeout.
Video Timeout
2 minutes
The video screen shuts off after the
timeout specified elapses.
NOTE
In Windows 95 systems, power management
settings under Windows override the settings estab-
lished in Setup. Make the Windows 95 power saving
settings match those in Setup for the best results.
Summary of Contents for Versa 2500 Series
Page 167: ...Index 5 ...