1-16 Getting Started
Installing the Battery Pack
Install the battery pack in your system as follows. (For in-
formation about replacing a battery pack, see “Replacing
the Battery Pack,” a little later in this section.)
!
CAUTION
Be sure to save your data before replacing the bat-
tery pack or connecting the AC adapter. Failure to
do so can result in data loss.
1.
If your system is on, save your data, close any applica-
tions running, and power off the system.
2.
Align the battery pack with the bay where you plan to
install it. Make sure the battery contacts are aligned
properly with the connector inside the bay.
The primary battery pack is usually installed in the front
bay. However, you can install it in the Diskette Drive
bay instead.
3.
Push the battery pack into the bay until the locking latch
on the bottom of the system clicks into place.
Summary of Contents for Versa 2500 Series
Page 167: ...Index 5 ...
