Using Your NEC Versa 4-11
Add another hard disk drive or second Li-Ion battery pack as follows.
1.
Remove the standard diskette drive, LS-120 drive, or CD-ROM reader
from the VersaBay II as described in “Removing a Device from the
VersaBay II.”
2.
Prepare your option for installation as follows:
To install a battery pack, first connect it to the VersaBay adapter that
came with the battery. (Follow the instructions that come with the
battery pack.)
To install a hard disk drive, first connect it to the appropriate Cradle
Pak. (Follow the instructions that come with the adapter.)
3.
Holding the front VersaBay II release latch towards the hard disk drive
bay, align the option and its carrier in the VersaBay II.
4.
Push in the option until it clicks into place.
5.
Turn the system over, open the LCD panel, and power on. The system
automatically recognizes the newly installed option.
20X CD-ROM READER
Your NEC Versa comes with a 20X CD-ROM reader that features the latest
in CD-ROM technology. The CD-ROM reader is assigned an available
drive letter.
Use the CD-ROM reader to load and start programs from a compact disc
(CD). You can also use the CD-ROM reader to play your audio CDs (see
“Audio CDs” in this chapter). The 20X CD-ROM reader is fully compatible
with Kodak Multisession Photo CDs™ and standard audio CDs.
The CD-ROM reader operates at different speeds depending on whether the
CD you are using contains data or music. This allows you to get your data
faster and to see smoother animation and video.
CD-ROM reader features are shown in the following figure. Descriptions of
these features follow.
Summary of Contents for V6220
Page 197: ...Index 6 ...
