manualshive.com logo in svg

NEC V6220, User Manual

The NEC V6220 User Manual is a comprehensive guide that allows users to effectively navigate through the features and functionalities of this advanced product. You can easily download this manual for free from manualshive.com, ensuring you make the most out of your NEC V6220 experience.

Share
Download
background image

    

 4-44   Using Your NEC Versa

5. 

Connect the power cable to the device and a properly grounded wall    
outlet.

6. 

Turn on power to the system and the device.

 

NOTE

Check that the device is online before you try to use it. See

the instructions that came with the device for more information.

  Serial Devices

 To install a serial device such as a printer or an external modem, you need a
cable with a female 9-pin connector.

 

NOTE

When you connect a printer, be sure to install the appropriate

printer driver through the Windows Control Panel.

 Follow these steps to connect a serial device to your NEC Versa.

1. 

Check that power to both the NEC Versa and the device is off.

2. 

Open the port cover on the back of the system and locate the serial port.

3. 

Align and connect the 9-pin connector with the serial port on the system.
Secure the connection with the screws provided.

4. 

Align and connect the other end of the cable to the appropriate port on
the device. Secure the connections with the screws provided.

Summary of Contents for V6220








































































































































































































Reviews:

No comments

Related manuals for V6220

Gateway M520 Replacement Manual preview
M520
Brand: Gateway Pages: 4
IBM ThinkPad T40 series Hardware Maintenance Manual preview
ThinkPad T40 series
Brand: IBM Pages: 188
Acer TravelMate P4 14 User Manual preview
TravelMate P4 14
Brand: Acer Pages: 93
Acer TravelMate P2 14 User Manual preview
TravelMate P2 14
Brand: Acer Pages: 88
Acer P259-MG User Manual preview
P259-MG
Brand: Acer Pages: 82
Acer P449-MG User Manual preview
P449-MG
Brand: Acer Pages: 83
Acer TravelMate 4150 Service Manual preview
TravelMate 4150
Brand: Acer Pages: 127
Panasonic Toughbook CF-M34NPFZPM User Manual preview
Toughbook CF-M34NPFZPM
Brand: Panasonic Pages: 32
Brother GeoBook NB-60 Instructions Manual preview
GeoBook NB-60
Brand: Brother Pages: 258
Clevo W330AU User Manual preview
W330AU
Brand: Clevo Pages: 260
Toshiba Portege M805D Specification Sheet preview
Portege M805D
Brand: Toshiba Pages: 4
Toshiba Portege M805-SP2907R Specifications preview
Portege M805-SP2907R
Brand: Toshiba Pages: 4
Toshiba Portégé M400-3G Specifications preview
Portégé M400-3G
Brand: Toshiba Pages: 2
Toshiba Portege M400-ST9113 Specifications preview
Portege M400-ST9113
Brand: Toshiba Pages: 8
Toshiba Portege M700-S7008X Specifications preview
Portege M700-S7008X
Brand: Toshiba Pages: 9
Toshiba Portege M400-S4032 Specifications preview
Portege M400-S4032
Brand: Toshiba Pages: 8
Toshiba Portege M400-S4031 Specifications preview
Portege M400-S4031
Brand: Toshiba Pages: 8
Toshiba Portege M300 Specifications preview
Portege M300
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands