manualshive.com logo in svg

NEC V6220, User Manual

The NEC V6220 User Manual is a comprehensive guide that allows users to effectively navigate through the features and functionalities of this advanced product. You can easily download this manual for free from manualshive.com, ensuring you make the most out of your NEC V6220 experience.

Share
Download
background image

    

 4-46   Using Your NEC Versa

  External Keyboard/Mouse

 You can add a full-size PS/2-style keyboard or PS/2-style mouse to your
NEC Versa using the Plug and Play feature. The PS/2 style keyboard and
the PS/2 style mouse are hot insertable allowing you to connect the devices
while the NEC Versa is powered on. You can continue to use the system
keyboard and VersaGlide touchpad while an external keyboard or mouse is
connected.

 

NOTE

For information about disabling the VersaGlide while an ex-

ternal mouse is connected, refer to Chapter 3, “Using BIOS Setup.”
The Internal Mouse parameter in the Advanced CMOS Setup sec-
tion of the BIOS Setup allows you to enable or disable the Versa-
Glide touchpad.

 To attach both an external keyboard and a external mouse at the same time,
use the optional NEC Y-adapter. For ordering information, see the online
Versa Tools Catalog.

 

NOTE

If you purchased this product outside the U.S. or Canada,

contact the local NECCSD office or their dealers for ordering infor-
mation. Reference the booklet, “Getting Service and Support in
Asia, Australia, and Europe,” to find out how to contact the local of-
fice in your country.

 To connect an external keyboard or mouse simply open the keyboard/mouse
port cover and connect the device to the keyboard/mouse port. You are now
ready to use your external keyboard or mouse.

Summary of Contents for V6220








































































































































































































Reviews:

No comments

Related manuals for V6220

EUROCOM racer 4w User Manual preview
racer 4w
Brand: EUROCOM Pages: 346
EUROCOM M190S World Warrior User Manual preview
M190S World Warrior
Brand: EUROCOM Pages: 149
Magicbook SHB-V7S6 User Manual preview
SHB-V7S6
Brand: Magicbook Pages: 113
bto x-book 17CL50 User Manual preview
x-book 17CL50
Brand: bto Pages: 316
Krüger & Matz Explore PRO 1410 Owner'S Manual preview
Explore PRO 1410
Brand: Krüger & Matz Pages: 44
Dell Inspiron 14 Specifications preview
Inspiron 14
Brand: Dell Pages: 7
Lenovo 019626U Brochure preview
019626U
Brand: Lenovo Pages: 4
Lenovo 019624U Hardware Maintenance Manual preview
019624U
Brand: Lenovo Pages: 126
Lenovo 019626U Hardware Maintenance Manual preview
019626U
Brand: Lenovo Pages: 148
Lenovo 019923U Hardware Maintenance Manual preview
019923U
Brand: Lenovo Pages: 158
Lenovo 019727U Hardware Maintenance Manual preview
019727U
Brand: Lenovo Pages: 184
Lenovo 01994JU Hardware Maintenance Manual preview
01994JU
Brand: Lenovo Pages: 196
Lenovo 01994JU Brochure preview
01994JU
Brand: Lenovo Pages: 4
Dell Inspiron 14 5448 Series Setup And Specifications preview
Inspiron 14 5448 Series
Brand: Dell Pages: 19
Acer Aspire A115-32 User Manual preview
Aspire A115-32
Brand: Acer Pages: 79
Dell Latitude 7320 Detachable Service Manual preview
Latitude 7320 Detachable
Brand: Dell Pages: 89
Dell Latitude 9430 Setup And Specifications preview
Latitude 9430
Brand: Dell Pages: 26
Toshiba L455D-S5976 Specifications preview
L455D-S5976
Brand: Toshiba Pages: 3

Brands by name

Popular brands

Load more brands