![NEC Univerge SV8100 Applications Download Page 63](http://html1.mh-extra.com/html/nec/univerge-sv8100/univerge-sv8100_applications_3860818063.webp)
SV8100
Issue 1.0
Desktop Applications
3 - 7
___________________________________________________________________________________
___________________________________________________________________________________
1.4.1
BLF/DSS Tabs
Each key on the
BLF/DSS Tab
is used to monitor another station on
the telephone system and provides one-touch access to that station.
In addition to the basic add-on module functionality, the
BLF/DSS
Tab
also provides access to other telephony functions.
1.4.1.1
BLF/DSS Programming
By default the BLF/DSS view includes an entry for the
user local extension.
Additional BLF buttons are created for each extension
that is programmed as a one-touch key on the user’s
phone. (MB 15-07-01 and 30-03-01)
One-Touch keys must be programmed on buttons that
physically appear on the phone or a console connected
to the phone. BLF information will not be provided to the
Desktop Application for any one-touch keys that are
programmed on buttons higher than the phone physically
has.
The desktop application acquires the list of programmed
one-touch keys at startup.
Any changes to the phone programming that occur while
the application is running are reflected in the application
only after the application is restarted.
Alternately, the Tools
’
Preferences/BLF-DSS tab
includes
a Synchronize function that reads the current phone
programming.
1.4.1.2
BLF Button Design
Each BLF button includes an LED image, followed by an
identifier.
The LED image changes colour to indicate the current
state of the extension.
The supported colours/states are as follows: Gray (Idle),
Green (Busy), Red (Call Forward Immediate/DND All).
The label can show the extension number, directory
name associated with this extension, or both, as
determined by the user settings.
1.4.1.3
BLF/DSS Layout
The Preferences/BLF-DSS tab specifies the layout of the BLF/
DSS area. Through this dialog the user can set the following:
Define BLF Groups (tabs).
Set Visible BLF Groups (tabs).