CALL PARK - SYSTEM
To Park a call
in a system orbit:
Note: You can Park Intercom or trunk calls.
1. With a call in progress - press a Park key (Park 1, Park 2,
etc).
Note: The Park key LED lights.
2. Use Paging to announce call.
3. Press the hookswitch to disconnect quietly.
Note: If not picked up, the call will recall to you.
- OR -
1. With a call in progress - press the Transfer key.
2. Dial #6 and the Park orbit (01~64).
Note: If you hear busy tone, the orbit is busy. Try another orbit.
3. Use Paging to announce call.
4. Press the hookswitch to disconnect quietly.
Note: If not picked up, the call will recall to you.
To pick up a parked call
:
1. Lift the handset.
2. Press the red blinking Park key (Park 1, Park 2, etc).
- OR -
1. Press the Speaker key.
2. Dial *6 and the Park orbit (01~64).
TRUNK QUEUING
(Use this feature when all lines are busy)
1. Lift the handset and dial 9.
2. When a busy signal is heard (the display will say BUSY)
Press the # button and hang up.
When a trunk becomes free - your extension will ring.
Pick up the handset and hear OUTSIDE dial tone.
Dial your number without dialing the access code 9.
NOTE: If you do not answer your phone within 10 seconds, the
queuing will be automatically cancelled.
16
LAST # REDIAL
1. Without lifting the handset, press the Redial on the joystick.
The last dialed number is displayed.
2. To redial the
last number
press #. OR Search for the desired
number from the Redial List by pressing the Redial Softkey or
VOLUME UP or VOLUME DOWN keys.
3. Lift the handset or press Speaker to place the call.
CALL PICKUP
Group Call Pickup
To answer a call ringing another telephone in your Pickup
Group:
1. Pick up the handset or press the Speaker key.
2. Press the P/U key
3. Press the GRP key to answer the call.
13
21 OCT THU 12:34PM
InPg ExPg P/U DN
21 OCT THU 12:34PM
P/U Page Grp
