CONFERENCE
1. Establish first intercom or trunk call. (display shows).
2. Press Conf softkey (display shows).
3. Dial the extension you want to add. - OR -
Access outside call by dialing 9 - OR – press “DIR” to access
the directory. (AnHd – returns you to call 1)
4. When second party answers (display shows), press Add to
add this call or Rls to end second call.
5. After Add has been pressed display shows.
6. When you are ready to being the conference press Begin
softkey. Press Add to continue adding to the conference call.
NOTE: Unless a conference bridge has been installed, A
conference call can consist of three parties. Two parties within
your office and one outside caller or Two outside callers and
one inside extension.
12
21 OCT THU 12:34PM
CONF RPT SAVE TRF
21 OCT THU 12:34PM
AnHd Dir
21 OCT THU 12:34PM
Begin Add
21 OCT THU 12:34PM
Add Rls
CALLER ID
Answer
Receive incoming ringing or transferred outside call:
1. Review the telephone display for the calling party’s name or
number.
2. Answer the call accordingly.
Temporary Memory
An unanswered call will cause the Call History key to flash (a
handset icon in the upper left hand corner of the display),
indicating a new call has been placed in the temporary
memory.
Press the center button of the joystick. The display will change
to:
Dial 1 for Missed calls.
Use up and down arrows to scroll through the log.
To place a call back to a number in the temporary memory list,
with the number to be dialed displayed, lift the handset or
press the Speaker key.
To delete, press Delete key and follow the softkeys.
17
[1] MISSED CALLS
[2] VOICE MAIL
21 OCT THU 12:34PM
2174423800 DIGITALCOMM
UP DN Delete Save
21 OCT THU 12:34PM
2174423800 DIGITALCOMM
One All