6) When you have finished the call, press END.
If the message NO SVC appears, you are outside the cel-
lular service area.
If lock indicators (FL)(PL) appears on the display, your
phone has been electronically LOCKED (see Locking the
Phone). You can still make emergency calls when the
phone is locked.
RECEIVING A CALL
1) When there is an incoming call, the phone rings, and the
CALL message flashes on the display.
If the ringing tone has been switched off, the flashing of the
display and keypad will alert you of an incoming call.
2) Press SND (or any key except PWR) and lift the phone
to your ear.
3) When you have finished your conversation, press END.
If you don’t answer the call, the CALLED message will
remain on the display (showing that someone has tried to
phone you). Press CLR key to clear the display.
SIGNAL STRENGTH
The quality of your call depends on the strength of the
cellular signal in your area. The phone displays current
signal strength as a series of circles on the left side of the
display screen. The more circles, the better the signal. If
the signal is poor, try moving the phone slightly to improve
reception. If you are using the phone in a building, it may
be necessary to move near a window, or outdoors for
better reception.
Received Signal Strength
Indicator
VOLUME KEY
The earpiece volume can be controlled by the volume key
VOL while in conversation mode.
-7-
PWR
o o o o
Summary of Contents for TT820e
Page 1: ...TT820e Owner s Manual ...
