THE BATTERY CHARGE INDICATOR
The Battery Charge Indicator can be
accessed by pressing [FCN] [8] keys
after power has been applied to the
phone. The display screen indicates the
battery charge level ranging from [o] to
[oooo]. [o] representing low battery and
[oooo] representing full battery.
CHARGING AND RECHARGING THE BATTERY
Charging the battery can be accomplished two ways.
(A) By direct connect of the AC Adapter to the charging
jack of the phone.
(B) By placing the phone into the charging stand.
(A)
1. Plug the AC Adapter into a standard
110V AC outlet.
2. Insert the DC plug into the phone
battery jack.
3. With power on, display shows:
(B)
1. Plug the AC Adapter into a standard 110V AC outlet.
2. Insert the DC plug into the charging stand jack.
3. Place the phone in the charging stand.
Note: Recharging of the battery usually takes approxi-
mately 10 hours.
A new battery must be fully charged before
being used for the first time.
Batteries last longer and perform better if allowed to
discharge fully at least once a week. You can do this by
leaving the phone switched on overnight, or until the
message RECHARGE BATTERY is displayed and the
phone shuts itself off.
NOTE: If the battery is too hot or cold, charging will be
interrupted until the battery reaches a normal temperature.
-3-
PWR
b a t t
o o o o
PWR
o o o o
C H A r g i n g
(B)
(A)
Summary of Contents for TT820e
Page 1: ...TT820e Owner s Manual ...
