background image

NEC SERVICE SUPPORT

NEC's Service Support group is ready to assist you with
any additional information that you may need in the op-
eration and integration of your NEC Cellular Telephone
and NEC Authentic Accessories. Service Support can be
obtained by contacting NEC at:

Telephone:

Writing:

1-800-637-5917 *

NEC America, Inc.

1-972-751-7500

Service Support
1621 Walnut Hill Lane
Irving, Texas 75038

* The 800 number listed above also provides access to
the NEC Repair Service and Parts Sales groups.

NEC Marketing & Sales

Marketing:

Sales Agency:

NEC America Inc.

NMI Corporation

Wireless Marketing Div.

14110 N. Dallas Parkway

1555 Walnut Hill Lane

Suite 300

Irving, Texas 75038

Dallas, Texas 75240

1-800-421-2141

1-800-CALL-NMI
(1-800-225-5664)

Copyright 

A

1998 by NEC Corporation

Manual Part Number: 621-0315
1st Edition May 1998

All Rights Reserved. Printed in U.S.A.

All Specifications and conditions are subject to change without
notice

LICENSED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS

4,954,951

4,942,516

4,896,260

4,829,419

4,825,364

4,686,622

4,531,182

4,396,976

4,371,923

4,121,284

4,120,583

4,435,732

4,471,385

4,672,457

4,739,396

4,675,863

4,817,089

4,912,705

5,022,024

5,121,391

Summary of Contents for TT820e





































Reviews: