NEC SuperScript 950C User Manual Download Page 71

Page: 71 / 82

RDERING

UPPLIES

APPENDIX D

RDERING

UPPLIES

VERVIEW

To order printer supplies, contact your NEC printer dealer
or call NEC Technologies at 1 800-632-2326 . You can also
contact NEC through the Internet at the following internet
address.

www.nectech.com/supplystore

Supplies

When replacing printer cartridges use ONLY:

•

NEC Black Print Cartridge, # 30-080

•

NEC Color Print Cartridge, # 30-085

Paper Supplies:

•

Fine white inkjet paper, # 70-100 (Pack of 500)

•

Premium coated inkjet paper, # 70-110 (pack of 100)

•

High grade glossy photo paper, #70-240 (pack of 10)

•

Premium transparency, # 70-120 (pack of 20)

•

T-shirt transfer paper, # 70-290 (pack of 10)

•

Snapshot photo paper (4 x 6), # 70-250 (pack of 24)

•

Glossy inkjet paper, # 70-115 (pack of 20)

See Appendix A of this user’s guide for specific
information about paper recommendations.

Note:

For warranty purposes, remember to register

your printer! Use the mail-in card included in the
Service Xpress Brochure or register at NEC’s website:
www.nec.com.

Summary of Contents for SuperScript 950C



















































































Search results

Summary of Contents for SuperScript 950C

Reviews:

Brands by name

Popular brands

NEC SuperScript 950C, User Manual

Search results

Summary of Contents for SuperScript 950C

Reviews:

Brands by name

Popular brands