NEC SuperScript 950C, User Manual

Page: 50 / 82

46 SuperScript 950C— User’s Guide
Printer Does Not Print
• Check that the printer is powered on (Indicator Light on
the printer operator panel is lit).
If the Indicator Light is flashing:
• Check that you have inserted the print cartridges, in the
correct position.
• Check that the print cartridges are sitting in their seats
correctly.
• If you inserted a new print cartridge, remember to press
the corresponding Reset button in the Printer Care tab
of the Printer Monitor.
If the Indicator Light is not flashing:
• Check that you removed the protective film from the
print cartridges.
• Assure that the paper is present and loaded correctly.
If a message is displayed on your screen:
• Perform the operation requested by the message and
printing will resume.
Print Cartridge Carriage Does Not Return to its Rest
Position
• Check that you have inserted the print cartridge
properly, in the correct housing.
• Check that the print cartridges are sitting in their
respective seats correctly.
• Check that nothing is blocking the carriage path.
Characters are Faint
• Check the ink level as seen in the Printer Care tab of the
Printer Monitor.
• Print test page to check if nozzles are blocked and that
all electrical contacts are active in the Print Cartridge.
TYPESTYLE Courier Upright 10
cpi / 12 pts Character font
CHARASET CP 437
International Character set
Table 4-4: Test Page Contents
SETUP
Parameter
Default Setting Parameter Description