manualshive.com logo in svg

NEC SuperScript 950C, User Manual

Share
Download
NEC SuperScript 950C User Manual Download Page 30

26

SuperScript 950C— User’s Guide

The Printer Monitor Window

The Printer Monitor is divided into a Status tab, Printer Care 
tab, and Options tab. The controls in each tab are briefly 
described in this section. For more information about using 
these controls, click the Help button.

Status Tab

Use the controls in the Status tab for viewing the progress of 
a print job, and for aborting, pausing, or restarting a print 
job. Status and error messages can also be viewed.

If the Always Minimized  check box is selected, an icon 

representing the printer will appear in the system tray of the 
Windows taskbar. If an error occurs, a red cross will be 
displayed on this icon to warn you.

Note:

If someone is printing to your shared printer, the 

Copy label (number of copies) will change to RAW. This 
corresponds to the spool data format that you are 
receiving.

Printer Care Tab

Use the Printer Care tab for changing, aligning, and cleaning 
the print cartridges. Help systems, such as How Do I and 
Troubleshooting, can also be started from this tab.

Summary of Contents for SuperScript 950C



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands