NEC SuperScript 950C, User Manual

Page: 29 / 82

25
P
RINTER
S
OFTWARE
options to learn which ones are best suited to your
printing needs. If your document is composed of mix
objects (Business Graphics, and Photos) select the
Opti-Print Printing Mode.
D
OCUMENT TYPE
• Choose Business if you want to print spreadsheets or
charts.
• Choose Clip Art if you want to print technical
drawings (CAD) or computer generated artwork.
• Choose Photos if you want to print photographs or
printed illustrations.
• Choose Unadjusted if you are printing documents
produced with software that enables the user to select
and calibrate the type of document.
T
HE
P
RINTER
M
ONITOR
The SuperScript 950C Print Monitor can be installed on
computers running Windows 3.1x. 95, or 98. Use it for
doing the following tasks.
• Monitoring Print Jobs
• Monitoring Printer Operational Status
• Servicing the Print Cartridges
• Changing the Operating Profile
If the printer is shared among network users, the error
messages reported by the Printer Monitor will be
displayed through message boxes supplied by the
Windows operating system.
If you send a print job to a computer that is sharing its
SuperScript 950C, the Printer Monitor will only display
the spooling of the job. Error messages will not be
displayed.
Running the Printer Monitor
To start the Printer Monitor:
1.
From the Windows taskbar, click Start .
2. Point to Programs , then NEC SuperScript 950C .
3. Select SS950C Printer Monitor .
The Print Monitor can be configured so that it will only
run when a print job is started. This is known as automatic
run mode.
To put the Print Monitor into automatic mode:
1.
From the Windows taskbar, click Start .
2. Point to Settings , then select Printers to open the
Printers window.
3. Select NEC SuperScript 950C .
4. From the File menu, select Show Monitor during
print
.
Note:
Remove the check mark next to Show monitor
during print if you don’t want to be notified about
printer errors by the Printer Monitor.