NEC SL1100, Programming Manual

Page: 308 / 666

Program 22 : Incoming Call Setup
22-18 : Private Call Assignment Setup
Level:
IN
Description
Use Program 22-18: Private Call Assignment Setup to define assignment and incoming ring pattern
for Private Calls.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Transfer Mode 0 = Not Defined (Pri-
vate call will not trans-
fer to a user in the sys-
tem, can be routed to
VRS message in PRG
40-10-06.)
1 = Internal Dial (Speci-
fied in PRG 22-18-02)
2 = Incoming Ring
Group (Specified in
PRG 22-04) Leave this program set to (0) Not
Defined to route the Private caller to
a VRS message to refuse the call.
This program can also be used to
route the Private caller to an internal
destination (PRG 22-18-02) or a
Ring Group (PRG 22-04). 0 14-01-27
15-02-02
40-10-06
02 Destination Num-
ber 1 = Internal Dial (up to
36 digits)
0 ~ 9,
* , #, P, R, @
2 = Incoming Ring
Group
0 ~ 25
No Setting 14-01-27
15-02-02
40-10-06
03 Incoming Ring
Pattern Incoming Ring Pattern
(0 ~ 9) (SL1000)
Incoming Ring Pattern
(0 ~ 13) (V3.0
Changed) (SL1100)
0 = Normal pattern
1 ~ 3 = Tone pattern (1
~ 3) (SL1000)
4 ~ 5 = Scale pattern (1
~ 2) (SL1000)
6~9 = Not Used
(SL1000)
1 ~ 4 = Tone pattern (1
~ 4) (SL1100)
5 ~ 9 = Scale pattern (1
~ 5) (SL1100)
10 ~ 13 = Tone pattern
(5 ~ 8) (V3.0 Added)
(SL1100) 0 14-01-27
15-02-02
40-10-06
Conditions
None
SL1000/SL1100 ISSUE 3.01
2-286 Program 22 : Incoming Call Setup
Program
22