Register the wireless microphone unit
(continued)
After registration, plug the telephone line cord back into the
wall jack.
•
If registration has failed, the base unit will display
Registration failed. Try again
and returns to idle.
You hear an error tone. Remove the microphone
units from the charging cradles and place them
back in. Repeat steps 1 to 3 to try the entire
registration process again.
•
If the screen does not display
Registration done
after step 3, repeat steps 1 to 3 to try the entire
registration process again.
•
All wireless microphone units should always be
kept on the charging cradles during deregistration
and registration. Any wireless microphone unit
which is registered before but not put into the
charging cradle will be deregistered after the
above operations.
•
Status indicators on the wireless microphone units
flash red and green alternately during registration.
•
To cancel registration, press
. The base unit
displays
Registration cancelled
. If registration is
cancelled, some of the wireless microphone units
may be deregistered. To register them back to
the base unit, repeat steps 1 to 3 to try the entire
registration process again.
Specifications are subject to change without notice.
© 2014 VTECH TELECOMMUNICATIONS LTD.
All rights reserved. 02/14. Version 1
Instruction sheet
Model: VCS704-WM
Wireless Conference System
ErisStation
TM
busines s phones.v te c h.c om
Wireless Conference Phone
