QB-V850ESFJ3 Preliminary User’s Manual ZUD-CD-05-0149 12/57
1.3 System Configuration
There are two configuration types: S Type and T Type.
This section shows each system configuration when using the QB-V850ESFJ3 connected to a PC (PC-9821
series or PC/AT
TM
compatible). Connection is possible even without optional products.
Connectors <9> to <13> differ depending on the target device to be emulated.
Figure 1-2. System Configuration (S Type)
<1> Host machine:
PC-9821 series, IBM PC/AT compatible can be used
<2> ID850QB
Disk/Accessory
Disk
Note 1
: Debugger, USB drivers, manual, etc.
<3> USB interface cable:
Cable used for connecting QB-V850ESFJ3 to host machine
<4> AC adapter:
Can support 100 to 240 V by replacing AC plug
<5> QB-V850ESFJ3:
This
product
<6> Check pin adapter (optional)
Note 2
:
Adapter used for monitoring waveforms with oscilloscope
<7> Extension probe flexible type (under development) (optional)
<8> Extension probe coaxial type (optional)
<9> Exchange adapter:
Adapter that performs pin conversion
<10> Check pin adapter (optional)
Note 3
:
Adapter used for monitoring waveforms with oscilloscope
<11> Space adapter (optional):
Adapter used for height adjustment
<12> Mount adapter (optional):
Adapter used for mounting target device
<13> Target connector:
Connector to be soldered to target system
<14> Target system
Notes 1.
Download the device file from the NEC Electronics website.
URL: http://www.necel.com/micro/index_e.html
2.
For the use of this product, refer to
[Related Information]
on the following webpage.
URL: http://www.necel.com/micro/english/iecube/index.html
3.
If both <10> and <11> are used, connection sequence of <10> and <11> may be reversed. In addition,
<8> is required when using <10>.
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
<9>
<11>
<12>
<13>
<14>
: Products enclosed by broken lines are optional.
<10>
