QB-V850ESFJ3 Preliminary User’s Manual ZUD-CD-05-0149 43/57
4.15 Cautions on Starting Debugger
When the debugger is started, the following warning or error may occur depending on the setting of the debugger
and the status of the target system. This is because the status of the target system is not in accordance with the
setting of the debugger. If a warning or error occurs, check the status of the target system or the setting of the
debugger.
It is recommended that the conversion adapter be connected to the QB-V850ESFJ3 even when the target
system is not connected. If the conversion adapter is not connected, the value of the input port may not be correctly
read.
•
ID850QB
“Target” Field of
ID850QB
Configuration
Window
Target System
Connection
Exchange Adapter
arget System
Power
ON/OFF
Error
No.
Error Message
Connect
Not
Connect
Connected
Not
Connected
Used Not
Used
ON OFF
Ff606
Check connection with the target
and turn on power to the target.
√
√
Wf607
Check the connection of the
conversion adapter.
√
√
√
√
Ff608
Disconnect the target.
√
√
√
Ff609
Turn off power to the target and
disconnect the target.
√
√
•
MULTI
“-tc” of 850eserv
Start Option
Target System
Connection
Exchange Adapter
Target System
Power
ON/OFF
Error Message
With -tc Without
-tc
Connected
Not
Connected
Used
Not Used
ON OFF
Check the target power on.
Or please delete "-tc" option.
√
√
Check the exchange adapter is connected.
√
√
√
√
Remove the target. Or please add "-tc" option
and power on the target.
√
√
√
Power off and remove the target. Or please add
"-tc" option.
√
√
