QB-V850ESFJ3 Preliminary User’s Manual ZUD-CD-05-0149 18/57
CHAPTER 2 SETUP PROCEDURE
This chapter explains the QB-V850ESFJ3 setup procedure.
Setup can be completed by performing installation/setup in the order in which it appears in this chapter.
Perform setup along the lines of the following procedure.
See
2.1 Names and Functions of Hardware
for jumper and clock board positions.
Main clock settings
At shipment, a 6 MHz resonator is mounted.
If the 6 MHz resonator is used as is, the setting does not have to be changed.
If the clock must be changed, see
2.2 Removal of Acrylic Board
and
2.3 Clock Settings
.
Sub clock settings
Software settings
See
2.4 Software Settings
.
Mounting and connecting connectors
When using the S Type, see
2.5 Mounting and Connecting Connectors (When Using S Type)
.
When using the T Type, see
2.6 Mounting and Connecting Connectors (When Using T Type)
.
Connecting USB interface cable and AC adapter
See
2.8 Connecting USB Interface Cable and AC Adapter
.
Switching power on and off
See
2.9 Switching Power On and Off
Connecting QB-V850ESFJ3 to target system
See
2.7 Connecting QB-V850ESFJ3 to Target System
.
•
When not using the extension probe (QB-144-EP-01S): see
2.7.1
.
•
When using the extension probe (QB-144-EP-01S): see
2.7.2
.
At shipment, the QB-V850ESFJ3’s 32.768 kHz resonator is selected.
If modification is necessary, see
2.3.4 Overview of subclock settings
.
