3-28 Option Installation
Figure Section 3-35 Securing the Device
8.
Replace the drive bracket (see “Replacing the 3 1/2-Inch Drive Bracket”).
Replacing the Front Panel
Replace the front panel as follows.
1.
Align the four front panel tabs with the holes in the front of the system unit.
2.
Evenly press the front panel into position until the tabs lock the panel in place
(see Figure Section 3-37).
Figure Section 3-37 Aligning the Front Panel
3.
Continue to Step 5 in “Replacing the 3 1/2-Inch Drive Bracket.”
Two of Four
Screws
Front Panel
Blank Panel
Tabs
(behind front panel)
Tabs
(behind front panel)
