B-2 System Board Jumpers
CHANGING PROCESSOR JUMPER SETTINGS
Use the following procedure when replacing the installed processor with a faster speed
processor. Jumpers requiring setting changes include the Processor/Bus Speed.
1.
Turn off and unplug the system and any connected external options.
WARNING:
System power must be off before
removing the cover and changing a jumper
setting.
2.
Remove the system unit cover (see Section 3, Option Installation, for cover
removal).
3.
Replace the processor (see Section 3 for processor upgrade procedures).
4.
Remove any expansion boards blocking access to the jumpers.
5.
Locate the Processor/Bus Speed jumper blocks on the system board (see Figure
Appendix B-1).
6.
Set the Processor/Bus Speed jumpers per Figure Appendix B-2.
CAUTION:
Unless updating the processor,
leave the processor jumpers at the factory
setting. Changing the settings jumpers could
damage the processor.
