3-16 Option Installation
CAUTION:
Before you install a cache module,
reduce static discharge by touching the system’s
metal chassis.
3.
Align the pin 1 end of the cache module with the pin 1 end of the secondary
cache socket. Using equal pressure, gently press the module into the socket.
4.
Check to see if the newly installed cache module requires a system board jumper
change. See Appendix B, System Board Jumpers.
5.
Replace any boards that you may have removed during this procedure (see
“Expansion Board Installation” earlier in this chapter).
6.
Replace the system unit cover.
