NEC POWERMATE 2000 - 08-1999 Manual Download Page 87

Page: 87 / 154

Managing System Resources 4-15

DMI version 2.0

NEC Auto-Discovery Agent

TCP/IP.

NEC WebTelligent Installation

Install the WebTelligent software and the NEC Auto Discovery Agent
software on a Windows 98, Windows 2000, or Windows NT web server
as follows.

Close all open applications before installing WebTelligent and Auto
Discovery Agent.

Install the web server software on a machine with a host name such
as PowerMate-A. Set up the web server as follows.

Install your web server software — Microsoft Personal Web
Server or other software (see the preceding list).

On the Windows desktop, click

Start

, point to

Settings

, and

click

Control Panel

At the Control Panel, double click

Personal Web Server

In Personal Web Server, click the

Administration

tab.

In Administration, click

Administration

to start your web

browser.

If the web browser does not start, click the

Startup

tab, click

Start

, click the

Administration

tab, and click

Administration

to start the browser.

Install the WebTelligent software on the web server.

Note

WebTelligent software is available on the NEC Application and

Driver CD. WebTelligent software can also be downloaded from the NEC
CSD website (www.nec-computers.com).

Summary of Contents for POWERMATE 2000 - 08-1999



























































































































































Search results

Summary of Contents for POWERMATE 2000 - 08-1999

Reviews:

Brands by name

Popular brands

NEC POWERMATE 2000 - 08-1999, Manual

Search results

Summary of Contents for POWERMATE 2000 - 08-1999

Reviews:

Brands by name

Popular brands