manualshive.com logo in svg

NEC POWERMATE 2000 - 08-1999, Manual

Share
Download
NEC POWERMATE 2000 - 08-1999 Manual Download Page 58

3-24   Configuring the System

Exit Menu

Choose the Exit menu by selecting Exit in the legend bar on the Main
menu screen. Other Exit menu options are available by selecting
submenus.  

Use the arrow keys to select one of the Exit menu options and press

Enter

 to select a submenu. Explanations of each Exit menu item are in

the following table.

Exit Menu Items

Menu Item

Settings (default is bold)

Exit Saving Changes

Implements the changes just made, and
exits BIOS.

Exit Discarding Changes

Exit leaving BIOS unchanged.

Load Setup Defaults

Loads default values for all BIOS setup
fields.

Discard Changes

Load previous values from BIOS for all
setup fields.

Save Changes

Saves all setup value changes to BIOS.

FLASH Utility

The system BIOS resides on a flash read only memory (ROM) chip in
your system. The flash ROM can be updated using the following
procedure. Before starting the BIOS update, NEC recommends that you
first contact NEC CSD for assistance (see Chapter 7 for contact
information).

Update the Flash ROM with a BIOS flash diskette. The diskette contains
the latest version of the BIOS code. You can get the diskette from NEC
CSD or download the BIOS from the NEC CSD website or Bulletin
Board System (BBS). See Chapter 7 for download, website, and bulletin
board system information.

Update the BIOS from the BIOS flash diskette as follows.

1. 

Write down the BIOS Setup parameters currently set on your system.

Summary of Contents for POWERMATE 2000 - 08-1999



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands