Adding Expansion Devices 5-11
3.
Shut down the system by pressing and holding in the power button
for four seconds or more.
4.
Unplug the AC adapter power cord from the power source.
To prevent damage to your LCD panel screen
when performing step 5, ensure that your work surface is clean, flat,
smooth, and free of any objects before positioning the system face down.
5.
Position the system on a clean, flat, smooth surface, with the screen
of the LCD panel facing down and the bottom of the system unit
facing you.
6.
On the bottom of the system unit, remove the screw fastening the
panel to the unit and remove the panel (see the figure “Removing the
panel” in the previous section).
7.
Locate the module that you want to remove.
8.
Eject the module by pressing the plastic retaining clips at the outer
edges of the socket away from the memory module.
Removing a SO-DIMM module
A – Plastic Clips
9.
If you are installing a module, see “Installing a SO-DIMM Module.”
10.
Install the panel and retaining screw.
11.
Plug in the AC adapter power cord and press the power switch on the
system unit.
