NEC POWERMATE 2000 - 08-1999 Manual Download Page 61

Page: 61 / 154

Configuring the System 3-27

Once the Application and Driver Installation Utility dialog box appears,
follow these steps to install the desired software.

Click the selection tab of your choice.

Do not install both the NEC SNMP Agent and

LANDesk Client Manager on the same computer. The two applications are
incompatible.

Click the desired application, driver, or utility.

Do not select and install drivers for any hardware

that is not currently installed on the system. Doing so can damage the
operating system.

Click

Install

to install your selection. Follow the on-screen

instructions to install your selection.

Click

Exit

to close the Application and Driver Installation Utility

dialog box.

Remove the CD from the CD-ROM drive when the installation is
complete.

NEC INFO Center

NEC CSD provides an online NEC INFO Center. The INFO Center
comes on the NEC Application and Driver CD. It is easy to install and it
provides quick access to all the information about your system. The NEC
INFO Center includes the following modules.

Tour
Use Tour to find out about NEC’s easy-to-use printed and online
documentation, software installation tools, and many support services.

User’s Guide
Use this module to get quick access to an online version of your
comprehensive printed user’s guide.

Summary of Contents for POWERMATE 2000 - 08-1999



























































































































































Search results

Summary of Contents for POWERMATE 2000 - 08-1999

Reviews:

Brands by name

Popular brands

NEC POWERMATE 2000 - 08-1999, Manual

Search results

Summary of Contents for POWERMATE 2000 - 08-1999

Reviews:

Brands by name

Popular brands