background image

30

• Use the 

 and 

 buttons to select “MULTI MODE”,

then use the 

 and 

 buttons to choose from

“SINGLE”,  “SIDE BY SIDE1~3” and “PICTURE
IN PICTURE (BOTTOM LEFT~TOP LEFT)”.

• Use the 

 and 

 buttons to select “MAIN”/ “SUB”

and “LEFT”/“RIGHT”, then use the 

 and 

 buttons

to choose from “VIDEO1~3”,  “HD/DVD1~2” and
“RGB1~3”.

PROGRAM TIMER

EXIT

DATE

MON

TUE

SAT

*

FRI

SAT

*

SEL.

RETURN

ADJ.

ZOOM

ON

08 : 30

- - : - -

 

08 : 30

08 : 30

- - : - -

 

08 : 30

15 : 30

OFF

10 : 30

18 : 15

12 : 15

10 : 00

- - : - -

 

12 : 15

16 : 00

INPUT

MULTI

VIDEO1

HD/DVD1

VIDEO1

RGB1

FUNCTION

INVERSE

WHITE

WHITE

PICTURE IN PICTURE          SIDE BY SIDE

PROGRAM TIMER

MULTI SCREEN SETTING

EXIT

MULTI MODE

:  BOTTOM LEFT

INPUT MODE

  MAIN

  SUB

SEL.

RETURN

ADJ.

:  RGB/PC1

:  VIDEO1

MULTI REPEAT

Two repeat timers are available.
Each timer has MULTI MODE, WORK TIME and INPUT
MODE functions.

Example:
TIMER1 is set to display RGB1 (MAIN) and VIDEO1
(SUB) for 4 hours in picute-in-picture mode.
TIMER2 is set to display RGB3 (LEFT) and HD/DVD1
(RIGHT) for 2.5 hours in side-by-side mode.

On  “MULTI REPEAT” of “TIMER”, select “ON”, then
press the MENU/ENTER button.
The “MULTI REPEAT TIMER” screen appears.
Adjust the items.

TIMER

EXIT

PRESENT TIME

PROGRAM

MULTI REPEAT

:     OFF

:     

OFF

SEL.

RETURN

ADJ.

MULTI REPEAT TIMER

EXIT

1  MULTI MODE

    WORK TIME

    INPUT MODE

      MAIN

      SUB

2  MULTI MODE

    WORK TIME

    INPUT MODE

      LEFT

      RIGHT

:     

BTM LFT

:     04H00M

:     RGB/PC1

:     VIDEO1

:     S BY S1

:     02H30M

:     RGB/PC3

:     HD/DVD1

SEL.

RETURN

ADJ.

Information

 MULTI REPEAT settings

MULTI MODE:

 Set the input mode to be displayed

while the timer is on.

WORK TIME:

 Set the time duration of the display.

Time range is from 1 minutes to 4 hours and 15 minutes.

INPUT MODE:

 Set the signal that will be displayed

within the selected screen.
Select “MAIN” or “SUB” for “PICTURE IN PICTURE
(BTM LFT~TOP LFT)” and “LEFT” or “RIGHT” for
“S BY S1~3”. Only one signal is selected for
“SINGLE”.

* The two repeat timers run consecutively, i.e., Timer1–

Timer2–Timer1–Timer2.

* When both PROGRAM TIMER and MULTI REPEAT

TIMER are set, priority is given to PROGRAM TIMER.

PROGRAM TIMER

MULTI SCREEN SETTING

EXIT

MULTI MODE

:  SIDE BY SIDE1

INPUT MODE

  LEFT

  RIGHT

SEL.

RETURN

ADJ.

:  RGB/PC1

:  VIDEO1

Setting the power on mode

This function sets the input mode at the time the power is
switched on.

Example: Setting “VIDEO2”

Set “ADVANCED OSM” to “ON” in the main menu (1/
2), then perform the following operations.

On  “PWR. ON MODE” of “OPTION3” menu, select
“VIDEO2”.
The available inputs depend on the setting of input.

OPTION3

3 / 4

EXIT

        PREVIOUS PAGE

TIMER

PWR. ON MODE

CONTROL LOCK

IR REMOTE

LOOP OUT

ID NUMBER

VIDEO WALL

        NEXT PAGE

:     

VIDEO2

:     OFF

:     ON

:     OFF

:     ALL

SEL.

RETURN

ADJ.

Information

 PWR. ON MODE settings

LAST:

 Last mode (the input that was last selected at

the time the power was switched off).

VIDEO1, 2, 3:

 VIDEO input mode.

RGB1, 2, 3:

 RGB input mode.

HD/DVD1, 2:

 HD/DVD input mode.

MULTI:

 Multi screen mode.

Follow the procedure used for PROGRAM TIMER. See
page 29.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.

Example: Setting “ON”

Set “ADVANCED OSM” to “ON” in the main menu (1/
2), then perform the following operations.

On  “CONTROL LOCK” of “OPTION3” menu, select
“ON”, then press the MENU/ENTER button.

OPTION3

3 / 4

EXIT

        PREVIOUS PAGE

TIMER

PWR. ON MODE

CONTROL LOCK

IR REMOTE

LOOP OUT

ID NUMBER

VIDEO WALL

        NEXT PAGE

:     LAST

:     

ON

:     ON

:     OFF

:     ALL

SEL.

RETURN

ADJ.

Information

 CONTROL LOCK settings

ON:

 Disables the buttons on the front panel.

OFF:

 Enables the buttons on the front panel.

* Even when the CONTROL LOCK is set, the POWER

switch will not be locked.

* This becomes effective when the on-screen menu goes

out.

Summary of Contents for PlasmaSync PX-61XM3A









































Reviews: