CHAPTER 2 HARDWARE INSTALLATION
User’s Manual U17307EJ2V0UM
12
2.3 System
Configuration and Components
The FPL2 system configuration is as given in the diagram below.
Figure 2-1. FPL2 System Configuration
USB cable
(Mini-B type)
Note 1
Target system
compatible with FP4
connector
Host machine
Target cable
FPL2-FA
PG-FPL2
FA adapter
Note 2
ID78K0S-QB Disk
Target system not
compatible with FP4
connector
Notes 1.
Use the USB cable (Mini-B type) included with the QB-78K0SKX1MINI.
2.
The FA adapter board is a product of Naito Densei Machida Mfg. Co., Ltd.
The FPL2 is connected to the host machine via the USB cable (Mini-B type). The FPL2 is connected to the user
system via the target cable. For the detailed specifications of the target cable and connector, refer to
CHAPTER 6
CONNECTORS AND CABLES
.
2.3.1
FPL2 display specifications, connector, and MODE switch settings
Figure 2-2. Layout Drawing of Connectors and LEDs
MODE switch
Target cable connector
USB connector
Power LED
Status LED
