NS170 User Guide - Configuring Your Server
3 - 33
Caution
Do not interrupt the creation of a RAID 0 using the Migrate
option. Doing so would make the server unable to restart, and
there would be no way to recover the data that was on the
source drive.
Note:
■
Before adding a new drive to an array, back up any data
contained on the new drive. Otherwise, all data will be lost.
■
If you stop the Build or Clear process on a RAID1 from ACU,
you can only restart it from Adaptec Storage Manager -
Browser Edition.
■
RAID1 created using the Quick Init option may return some
data miscompares if you later run a consistency check. This
is normal and is not a cause for concern.
■
The ACU allows you to use drives of different sizes in a
RAID1. During a build operation however, only the smaller
drive can be selected as the source or first drive.
■
When migrating from single volume to RAID0, migrating
from a larger drive to a smaller drive is allowed. However the
destination drive must be at least half the capacity of the
source drive.
Caution
Adaptec does not recommend that you migrate or build an array
on Windows dynamic disks (volumes), as it will result in data
loss.
5.
When you have finished, press
Done
.
