30
9. NETWORK SETTINGS
9-5. IMAGE EXPRESS UTILITY
Configure the settings when using Image Express Utility Lite.
Item
Description
Remarks
Mode
Select the operating mode.
Free: Set the free mode.
Control: Set the managed mode.
The default factory setting when
shipped is “Free”.
NOTE:
• If you change the setting of the operating mode, connecting to the IMAGE EXPRESS UTILITY, it will not be reflected immediately.
When the IMAGE EXPRESS UTILITY becomes unused condition, the change in the operating mode will be reflected.
9-6. NETWORK SERVICE
AMX setting
If you connect this device to a network compatible with the NetLinx control system of AMX Corporation, you can en
-
able/ disable the detection setting from AMX Device Discovery. A check mark is not marked when the device is first
shipped from the factory.
See the website of AMX Corporation for more information on AMX Device Discovery.
HTTP server configuration
Set the password for logging into the PROJECTOR CONTROL screen. A maximum of up to 10
alphanumeric characters can be set for the password.
PJLink setting
Set the login password for using PJLink. A maximum of up to 32 alphanumeric characters can be set for the pass
-
word.
Alert e-mail setting
When using this device connected to a network, computers and other devices will be notified of the status of this
device via e-mail if the lamp of this device is due for replacement, or if an error occurs.
ALERT MAIL
This option will notify your computer of lamp replace time or error messages via e-mail
when using wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The lamp and filters are at the end of its usable life. Please replace the lamp and
filters. Projector Name: NEC Projector
Lamp Hours Used: 100 [H]
SENDER’S ADDRESS
Enter sender’s address.
SMTP SERVER NAME
Enter the SMTP server name to be connected to the projector.
RECIPIENT’S ADDRESS
1, 2, 3
Enter your recipient’s address. Up to three addresses can be entered.
TEST MAIL
Send a test mail to check whether your settings are correct or not.
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network
settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this
happen, check if the Recipient’s Address is correct.
