NEC NP-PH1000U User Manual Download Page 197

Page: 197 / 244

183

7. Maintenance

2. Remove the filter.

Pull the top of the filter outward and remove the filter by lifting

it up.

Filter

3. Install the new filter.

Insert the filter with “

↓

AIR FLOW

↓

” facing the projector.

(1) Insert the filter in the flange.
(2) Fit the top edge of the filter in the inlet.

Flange

4. Place the filter cover back onto the projector cabinet.

(1) Insert the guide pin (4 locations) of the projector into the

notch (4 locations) of the filter cover.

Notch

Guide pin

(2) Slide the filter cover to the right and tighten each of the

two knobs by turning them clockwise.

NOTE:

Be sure to clean both filters (left and front sides) to display the filter

usage hours as accurate as possible.

Summary of Contents for NP-PH1000U





















































































































































































































































Search results

Summary of Contents for NP-PH1000U

Reviews:

Related manuals for NP-PH1000U

Brands by name

Popular brands

NEC NP-PH1000U, User Manual

Search results

Summary of Contents for NP-PH1000U

Reviews:

Related manuals for NP-PH1000U

Brands by name

Popular brands